150 Watt Equivalent LED Flood Light with Dimmer Control
Completely adjustable from 150 watts down to 25 watts.
It includes a 4500 degree yellow correcting filter for standard indoor use. The light is powered by any standard 12 volt battery pack with cigarette socket.
The filter attaches easily with two knurled thumb screws. All functions are located on the backside. At full wattage, the unit draws only 1.25 amps. At 50 watts it draws only .4 amps. No matter the setting you will get extremely long run times. The high powered LEDs are cooled via an aluminum core and slot finned outer
housing. The light will always stay cool enough for direct handling. On the light’s bottom is a metal universal shoe with a 1/4” x 20 mounting thread. The 5 high power LEDs use only 3 watts each with a 80 degree apread. Illuminance measures 1100 Lux/1M. 5800K color temperature with clear filter. 4500K color temp with yellow filter. Up to an 80,000 hour life span.
Weighs 1.3 pounds. Size 4” high x 4” wide x 3” deep.
Shown with yellow filter attached
The SA-1 can be attached to any camera’s shoe mount for perfect bounce lighting. The swivel feature with locking knob is located at the top of the unit. All lights, LED35, LED35D, LED35N, LED14, LED150 and LED90 can attach to this
adaptor.
Unit on left shows top shoe mount attachment.
Unit on right shows 1/4’ mounting thread.
Bottom shows shoe mount with 1/4’ thread hole. Unit also includes mini Sony hot shoe adaptor.
