4 Pin XLR Adaptors and Extensions
Model XLR-5MF 5 ft. Model XLR-10MF 10 ft Model XLR-20MF 20 ft
4p Male to 4p Female from 16ga wire.
Model XLR-5FF 5 ft.
Model XLR-10FF 10 ft
Model XLR-20FF 20 ft
4p Female to 4p Female from 16ga wire.
MODEL XLR-YF
One male to two females,provides a two power outlets. Each branch is about 5” long.
MODEL XLR-YM
One female to two males, for two power sources. Each branch is about 5” long.
MODEL XLR-CP
Cigarette plug to female XLR. Connects XLR equipment from a car or from any 12 & 14 volt battery pack with a cigarette socket. 16” long.
MODEL XLR-CJ
Cigarette socket to male XLR. Converts XLR battery packs to cigarette lighter socket. 16 inches long.
Power tap - 4 pin female XLR
Model PT-XLR
Power tap w/ 28” bare lead
Model PT-CABLE
Power Tap (SD) Adaptors
Miniature AC Power Supply for DV Cameras with 4 Pin XLR
Model PSA-124
This lightweight switching power supply works with either 110 volt or 220 volt A/C. IEC connector for easy adaption to overseas use. Includes US standard 120v A/C input cord. The three foot output cord is terminated with a 4 pin female XLR connector. Output Rating: 12 volts 6 amps regulated. Weight - 1.2 lbs. Input Rating 100 to 240 vac 50-60 cycle.
New Power Output Cords for all Power Tap Batteries
Model SW-XPEXS20
Model SW-XPEXS48
Model SW-XPDSLRC
Model SW-XPMAGIC12
Specifications:
Input: DC 11-17v
Output for Camera: DC7.9v, 3A
Output for P-Tap: DC 11-17v, Unregulated
Green LED Indication: Power input
Red LED Indication: Camera power output
Length: 24"
The XP model cables can be used with any battery or power supply with a power tap output. The cables features a regulated 7.2v connector jack for the OEM Canon 5D/7D(DR-E6 required) Camera with an inline female P-Tap connector for 12vdc, housed in an enclosure. Also includes both red and green LED indication to display status of battery power.
Specifications
Input: DC 11-17v
Output for Camera: DC12v, 2.5A
Output for P-Tap: DC 11-17v, Unregulated
Green LED Indication: Power input
Red LED Indication: Camera power output
Length: 24"
The XP model cables can be used in association with a Switronix accessory or used solo with a PRO-X series Lithium Ion battery product. The cables features a regulated 12v connector jack to power the Black Magic Mini Converter with an inline female P-Tap connector for 12vdc, housed in an enclosure. Also includes both red and green LED indication to display status of battery power.
Specifications:
Input: DC 11-17v
Output for Camera Pin Connection: DC11-17v, Unregulated
Output for P-Tap: DC 11-17v, Unregulated
Length: 20"/ 48”
The XP-EX-S cable allows you to power both Sony EX Camcorder and a 12v accessory(i.e. monitor, on-camera light) from any powertap 12v power source.
Compatible with Sony EX1 and EX3
Model SW-XPAJA5
The new XP-AJA-5 cable allows users to plug into any battery via V-mount or Gold Mt Plate and power both 12vdc accessories(ie. Monitor, light) as well as an AJA mini converter. Compatible with the AJA mini converter units accepting 5v, and AJA 2-Pin connector
Specifications:
Input: DC 11-17v
Output for AJA: DC 5v, 3A
Output for P-Tap: DC 11-17v Unregulated
Green LED Indication: Power input
Red LED Indication: AJA power output
Length:24"
Model SW-XPZOOM5
The new XP-Zoom-5 is a 5v regulator cable giving you the ability to power the Zoom H4N from a powertap power source. Plug the cable into the powertap end of your battery or mount plate; the other end plug into the Zoom H4N, and have nearly unlimited runtime(18hrs. on an XP-L90S).
Specifications:
Input: DC 11-17v
Output for Device: DC 5v, 1A
Length: 24"
