14 Volt Lead Acid Battery Brick with belt loops & 4 Pouch Belt
14 volt batteries are made for all cameras that accept higher voltage inputs & 4 pin XLR connectors. When used with a standard 12 volt light you get a longer run time at a higher output. The halogen bulb will burn brighter and dim only when the baterry is truly drained.
Lead acid batteries are rated to give 200 to 300 recharges when they are fully drained in each use. If the battery is only used for 50% of rated capacity up to 500 uses are possible. Proper Charging, Care and Maintenance... It is always best to recharge a fully discharged battery as soon as possible (usually within 24 hours). Uncharged batteries will go bad if you wait too long before recharging. A partially discharged battery does not need charging immediately but if you are going to store it away do so after charging it to full capacity. These batteries (when 100% charged) can be stored up to six months, after which a topping charge is recommended. Always store the battery in a cool dry location.Do not overcharge or undercharge batteries. Constant over or undercharging will shorten battery life. We make two types of chargers. The first type is an inexpensive taper charger that provide overnight charging. They work great but it is necessary to monitor the battery and disconnect the charger when done. Whenever a battery has been drained only partially, the charge times must be adjusted. These chargers will overcharge your battery if left on after full charge has been reached. The second type of charger we offer is an automatic shut off charger. Automatic chargers represent the best way to recharge and are fault free. The 14 volt batteries use the BCQ-14 (1 amp unit).
Model LA145NC
Model BCQ-14
Automatic 1 amp shut off. Charges LA-148 in 9 hrs, LA-145 in 5 hrs.
Model BCQ-14XLR*
* used on LA148XLNC
Model BC-151
15 volt 1 amp rated. Charges LA-148 in 9 hrs, LA-145 in 5 hrs.
Model BC-151XLR*
* used on LA148XLNC
| Part # includes 10” 4p XLR no charger included | Part # includes 10” 4p XLR standard charger | Part # includes 10” 4p XLR automatic charger | Part # includes 4 pin XLR on 6’ cord no charger | Part # includes 4 pin XLR on 6’ cord standard charger | Part # includes 4 pin XLR on 6’ cord automatic charger | Capacity Amp Hours | Weight in Lbs. | Size in Inches height x width x depth | Run Times in minutes for Lighting 100w 50w 35w |
| LA145NC | LA145 | LA145ATM | LA145LNC | LA145L | LA145LATM | 4.5 | 4.5 | 6.5x4x1.8 | 30 50 200 |
| Part # includes 2” 4p XLR no charger included | Part # includes standard charger | Part # includes automatic charger | Part # includes 2 XLRs - 2nd XLR on 6’ cord with 4 pin XLR no charger | Part # includes 2 XLRs - 2nd XLR on 6’ cord with 4 pin XLR & standard charger | Part # includes 2 XLRs - 2nd XLR on 6’ cord with 4 pin XLR & automatic charger | Capacity Amp Hours | Weight in Lbs. | Size in Inches height x width x depth | Run Times in minutes for Lighting 100w 50w 35w |
| LA148NC | LA148 | LA148ATM | LA148XLNC | LA148XL | LA148XLATM | 9 | 8.9 | 24x3x2.5 | 55 120 200 |
RECYCLE YOUR BATTERIES: To help protect our environment, we recommend that all batteries be recycled. You can find a local recycling center by going
to: http://earth911.com/hazardous/single-use-batteries , or in the United States call 1-800-CLEANUP for recycling location near you.
