14 Volt Lithium Ion Rechargeable V Mount Batteries
Model BPLI-95 95 Watt Hour
Japanese Li-on Cells, 5 Stage LED Capacity Indicator Maximum Voltage: DC 16.8V
Run time without a light: BPLI-95 approx 165 min.
Battery protection circuit: over-discharge, over-charge and over-current. Maximum discharge current: is 6 amps. End voltage is 11volts. Internal Resistance (maximum): <= 260 milli-ohms. Power Indicator: 5 LED power status via momentary push button.
BPLI-95 weighs 26 ounces, 5.6” x 3.3” x 1.9” ”
Maximum Voltage: DC 16.8V Nominal Voltage: DC 14.8V
Nominal Capacity: SW-XPL90S 6.3Ah 90Wh SW-XPL130S 9.1Ah 130Wh
Run time shooting without a light: SW-XPL90S 200 min. SW-XPL130S 300 min.
Internal protection circuits monitor cell balance, temperature, over charge and over discharge. Power guage with a 4 stage LED indicator. Units have a power port for a 12v light . Maximum discharge current is 7 amp.. End voltage is 11volts. Storage -20°C to 60°C.
SW-XPL90S weighs 32 ounces, 5.9” x 3.8” x 2” SW-XPL130S weighs 38 ounces, 5.9” x 3.8” x 2.”
Model SW-GPS2LSJ
Charges 2 SW-XPL90S battery packs at the same time. The unit is designed to charge both units at the same time at full 1.5 amp current. Full charge takes 5 hours on the 90 and 7.5 hours on the 130. A green LED is located under each battery mount. When a battery is mounted the green LED will flash to indicate battery is charging. At completion the LED turns solid green. Unit will also charge most other V mount 12v to 14.4v Ni-Cad, NMH, and Lion batteries. This unit also includes a A.C. power cord with a female 4 pin XLR. When the charger is not in use, it can function as a A.C. power supply. Input 100-220v, for US & Europe. Weighs 2.8 lbs Size 8.5” x 6” x 2.50”
New Power Output Cords for XPL90S & XPL130S
Model SW-XPEXS20
Model SW-XPEXS48
Model SW-XPMAGIC12
Model SW-XPDSLRC
Specifications
Input: DC 11-17v
Output for Camera: DC12v, 2.5A
Output for P-Tap: DC 11-17v, Unregulated
Green LED Indication: Power input
Red LED Indication: Camera power output
Length: 24"
Description
The XP model cables can be used in association with a Switronix accessory or used solo with a PRO-X series Lithium Ion battery product. The cables features a regulated 12v connector jack to power the Black Magic Mini Converter with an inline female P-Tap connector for 12vdc, housed in an enclosure. Also includes both red and green LED indication to display status of battery power.
Specifications:
Input: DC 11-17v
Output for Camera: DC7.9v, 3A
Output for P-Tap: DC 11-17v, Unregulated
Green LED Indication: Power input
Red LED Indication: Camera power output
Length: 24"
The XP model cables can be used with any battery or power supply with a power tap output. The cables features a regulated 7.2v connector jack for the OEM Canon 5D/7D(DR-E6 required) Camera with an inline female P-Tap connector for 12vdc, housed in an enclosure. Also includes both red and green LED indication to display status of battery power.
Specifications:
Input: DC 11-17v
Output for Camera Pin Connection: DC11-17v, Unregulated
Output for P-Tap: DC 11-17v, Unregulated
Length: 20"/ 48”
The XP-EX-S cable allows you to power both Sony EX Camcorder and a 12v accessory(i.e. monitor, on-camera light) from any powertap 12v power source.
Compatible with Sony EX1 and EX3
Model SW-XPAJA5
The new XP-AJA-5 cable allows users to plug into any battery via V-mount or Gold Mt Plate and power both 12vdc accessories(ie. Monitor, light) as well as an AJA mini converter. Compatible with the AJA mini converter units accepting 5v, and AJA 2-Pin connector
Specifications:
Input: DC 11-17v
Output for AJA: DC 5v, 3A
Output for P-Tap: DC 11-17v Unregulated
Green LED Indication: Power input
Red LED Indication: AJA power output
Length:24"
Model SW-XPZOOM5
The new XP-Zoom-5 is a 5v regulator cable giving you the ability to power the Zoom H4N from a powertap power source. Plug the cable into the powertap end of your battery or mount plate; the other end plug into the Zoom H4N, and have nearly unlimited runtime(18hrs. on an XP-L90S).
Specifications:
Input: DC 11-17v
Output for Device: DC 5v, 1A
Length: 24"
